18.5 Inch USB Pcap ITO GG Touch Glass Panel For Educational Application
Contact Person : Rocky
Phone Number : 17798692719
WhatsApp : +8618915500665
|Price :||$43-46/piece||Packaging Details :||carton|
|Delivery Time :||5-8 work days||Payment Terms :||L/C, T/T, Western Union|
|Supply Ability :||50000~100000pcs/Month|
|Place of Origin:||Suzhou, Jiangsu, China||Brand Name:||Master Touch|
|Touch Point:||10||Operating System:||Android/ Linux/ Windows|
|Touch Technology:||Pcap (projected Capacitive)||Controller:||ILI2510|
|Channel:||TX: 40 RX: 50||Operating Temperature:||-20~80 ℃|
|Storage Temperature:||-30~80 ℃||USB Cable Length:||1 M|
5V USB2.0 GG Touch Panel,
RX50 Channel GG Touch Panel,
5V 19 Inch Touch Screen Panel
19 Inch Master Touch Brand 5V Power Input USB Interface GG Touch Panel
1. Product Description
MST G + G Capacitive Touch Panel is made of a surface tempered glass and a ensor glass with Pcap technology. Projected Capacitive Technology permits more accurate and flexible operation by etching the conductive layer on the touch screen. GG is suitable for mass production and has better appearance properties, but it has high investment costs and is heavier than film-based panels.
2. Basic Features
|Channel||TX: 40 RX: 50||-|
|Power||5V||USB: 4.7V ~ 6.0V, Typical:5V|
|Communication||USB||USB: 2.0 Full Speed|
|Number of Touch point||10||-|
|O.S.||Windows/ Android/ Linux||plug and play|
1.Active Mode: Max.120mA @ USB Input 5V
2.Idle Mode: 90mA @ USB Input 5V
3.Sleep Mode: less than 1mA @ USB Input 5V
|Cover Lense O.D.||421(L)×346(W)|
4. Optical Characteristics
|Sensor Dimension||OD Size||X||392.82||mm|
8. Cosmetic Inspection
The following standard only applies to the visual areas. If the TP function is good, the non-visual appearance may negotiate to relax the standard. W=Width L=length D=Diameter GT=Glass thickness. If soft cloth which dips in alcohol can wipe besmirch, it does not apply to this appearance standards.
Inspection methods and conditions:
1)Inspection environment: Temperature:20-22 ℃; Humidity: 65 + 10% RH;
2)Inspector qualifications: The appearance of product must be inspect by a good eyesight inspector.
3) Inspection methods: The distance between inspector and product should be 30±2cm and putting a lamp 12 to 20 watts of cold white fluorescent lamp in the observation station of product.
Pay attention to the following matters when inspection:
A.Inspectors must wear a fingerstall.
B.Put the product in front of inspector, hands hold the edge of products carefully and can’t make it bended.
C.Inspectors shouldn’t stare at a certain point but continue covered watching.
D.According to the following standards judge whether products conform to the requirement. If found other defect, from perspective of appearance consider whether customers accept this defect in end product.
Enter Your Message